Machine Specifications

Machine Specifications APL Series
Spec.	Bend capacity ton	Bend length mm	Table width mm	Frame inside width mm	Frame gap mm	Ram stroke mm	Open height Intermediate piece		Depth adjustment mm	Up/Down speed mm/sec			Tank Capacity l	Motor KW-p	Weight kg
Model	Bend capacity ton	Bend length mm	Table width mm	Frame inside width mm	Frame gap mm	Ram stroke mm	With mm	Without mm	Depth adjustment mm	Down	Bend 50/60Hz.	Up 50/60Hz.	Tank Capacity l	Motor KW-p	Weight kg
APL-5513	55	1300	120	998	410	155	300	400	145	100	7.5 / 9.0	110/130	90	3.7-4	3500
APL-5520		2000		1698									110		4100
APL-5525		2500		2198									140		4800
APL-5531		3100		2798									240	5.5-4	5700
APL-8020	80	2000		1694									110		4500
APL-8025		2500		2194									140		5000
APL-8031		3100		2794									240		6300
APL-11020	110	2000		1660		205	350	450	195	90		70 / 85	150	7.5-4	5200
APL-11025		2500		2160						100			200		5600
APL-11031		3100		2760									250		7200
APL-11041		4100		3755									270		9100
APL 13020	130	2000		1655						90			150	11-4	5500
APL-13025		2500		2155						100			200		6100
APL-13031		3100		2755									250		7500
APL-13041		4100		3755									270		9800
APL-16025	160	2500	160	2095						80	7.5 / 9.0	90 / 110	180		8400
APL-16031		3100		2695						90			190		9200
APL-16041		4100		3695						100			260		1160
APL-20025	200	2500		2090						80			180	15-4	9000
APL-20031		3100		2690						90			190		10200
APL-20041		4100		3690						100			260		13200
APL-25025	250	2500		2030		255	400	500	245	80	6.0 / 7.0		300		12000
APL-25031		3100		2630						90			320		13200
APL-25041		4100		3630						100			450		15800
APL-30025	300	2500		2020						80			300	18.5-4	13000
APL-30031		3100		2620						90			320		14200
APL-30041		4100		3620						100			450		17000
Standard accessories		Back gauge Intermediate plates with key					Anchor bolts (4) Floor pieces (4)				Standard tools Touch panel screen floppy (DOS/V base)
Options		Light beam safety device Safety fence Two hand controller					Type of B.G. Stopper Front gauge Lift table				Lever type easy clamp for punch Hydraulic one touch clamp for punch Punches & dies

CNC Specifications
Controller Type-Controller Axes	APLIC-3300 (3 axes), 3400 (4 axes), 3501 (5 axes), 3502 (5 axes), 3600 (6 axes), 3701 (7 axes), 3702 (7 axes).
Controller Type-Controller Axes	Simultaneous 3 ~ 7 axes control
Control System	PC based CNC controller, LCD color touch panel
Memory Capacity	100 works x 17 process (R bend=1 process)
External memory	3.5 inch floppy disk
Depth Accuracy	Repetitive stop accuracy ± 0.005mm (At off-center load) ± 0.01m
Ram Tilting	Max. ±5 mm (Right side reference) Unit 0.0001mm

Specification of Control Axes
Axes	C.F. Compensator C	B.G. Travel X1, X2	B.G. Stopper Slide Z1, Z2	B.G. Lift R
Item	C.F. Compensator C	B.G. Travel X1, X2	B.G. Stopper Slide Z1, Z2	B.G. Lift R
Positioning Accuracy (mm)	±0.01	±0.05	±0.5	±0.3
Min. Input Unit (mm)	0.001	0.01	0.1	0.1
Positioning Speed (m/min)	0.03~0.15 (mm/sec)	30	25	2
Effective length (mm)	0.3~1.5	500	800~3500	55~125
AC Servo Motor (kw)	0.4	0.4	0.1	0.4

CNC Specifications

Specification of Control Axes

Axes